Booth & Banquette Seat
To be positioned in arrangement as shown on drawing if being located along a back wall of the semi-private dining room. In this case the arrangement must always be facing out towards main dining space

Booths and banquette can also be used individually if required

Purple leather FA10 to be used on both booths and banquette

Booths and banquette should always be paired with slatted back dining chair C06

Booths will be of fixed dimensions as shown on drawings to cater for groups up to 7 covers

Banquette length will vary depending on site constraints

Lifestyle Display Case
To be located above straight banquette along the back wall within semi-private dining room

Display case must always be facing out towards main dining space

To be centred on back wall within space

Height of unit will always be as shown on drawings, width will vary to match the length of the banquette

Wall light fitting L06 to be fixed along front of top shelf. An odd number should always be installed at equal intervals

Faceted Star Mirror
To be located above booth seats along the back wall within semi-private dining room (fig. a)

Star mirrors must always be facing out towards main dining space

To be centred above each booth seat at a height of 1250mm to u/s of mirror from FFL

Preferred configuration either side of lifestyle display case

To always be mounted onto painted timber boarded wall finish PT01

Size of mirrors to always be as shown on drawings

Reference 1
Reference 2

GLASS SCREEN AND DOORS
Glass screens to be used as a divider between the semi-private dining rooms and main dining space

Doors allow flexibility to have these rooms open as part of the restaurant or closed off as bookable space

Doors are same width and pattern design as screens to allow perfect alignment when in open position

Doors on sliding track mechanism concealed within floor and ceiling, refer to drawing 223 for details

In instances where there are 2 semi-private dining rooms, these rooms will also be divided by fixed glass screens

In instances where there are 2 semi-private dining rooms, these rooms will also be divided by fixed glass screens

Required space for screens to be split into equal parts so each screen and door are the same width

The overall length of each individual screen or door will vary between 900mm and 1300mm

The height is always fixed at 2435mm with a 165mm bracket to allow fixing into the ceiling above which is an overall height of 2600mm

The pattern insert section will always be at a fixed height of 2185mm

The width of the pattern insert section will vary between 800-1200mm

The preferred pattern width is 1100mm to allow the best part of the pattern to be visible

Mixed coloured glass inserts to pattern;

23% GL01 (light blue), 23% GL02 (medium blue),

23% GL03 (dark blue), 31% GL04 (clear)

For pattern artwork, use EPS file

Glass Screen and Doors
The planked timber ceiling will be located over the entire semi-private dining room. This ceiling is at a height of CH 2600mm to u/s of planked timber

Ceiling to be split by the same equal divisions as glass screens so that the join where the timber planks meet at 45 degrees lines through with the meeting point of each screen